歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題噴淋清洗機的8點功能特點

常見問題

噴淋清洗機的8點功能特點

作者：admin來源：http://xsjtl.com/時間：2023-03-01

噴淋清洗機主要利用設備現場的剪切力和氣泡的空化腐蝕進行清洗。在制備過程中，可以有效地利用其特殊的農藥洗脫液對物理沖擊進行浸泡和回收，有效去除農藥殘留，達到高能效、清潔、安全的農產品，全、批量、低成本的效果。下面來了解了解噴淋清洗機的功能特點。

Spray cleaning machine mainly uses the shear force on the equipment site and cavitation corrosion of bubbles to clean. During the preparation process, its special pesticide eluent can be effectively used to soak and recover the physical impact, effectively remove the pesticide residues, and achieve the effect of high energy efficiency, clean, safe agricultural products, full, batch, and low cost. Let's understand the functional characteristics of the spray cleaner.

噴淋清洗機的功能特點

Function characteristics of spray cleaning machine

1。噴淋清洗機的內腔主要由不銹鋼制成。耐酸堿，使用壽命長。

1。 The inner chamber of the spray washer is mainly made of stainless steel. Acid and alkali resistance, long service life.

2。該設備將有效地配備加熱和溫度自動控制系統，使用其不銹鋼加熱管即可直接加熱。

2。 The equipment will be effectively equipped with heating and temperature automatic control system, and can be directly heated by using its stainless steel heating pipe.

3。采用輥道輸送機，工件運轉平穩，驅動輥均為不銹鋼。

3。 Roller conveyor is adopted, the workpiece runs smoothly, and the driving rollers are made of stainless steel.

4。建立液位安全控制系統，確保機器正常運行。

4。 Establish the liquid level safety control system to ensure the normal operation of the machine.

5。提供循環過濾系統以確保溶液的清潔度。

5。 Provide a circulating filtration system to ensure the cleanliness of the solution.

6。往復移動噴涂可在所有方向清洗工件。

6。 Reciprocating moving spraying can clean the workpiece in all directions.

7。高壓噴淋清洗設備有效地利用了扇形陶瓷噴嘴，調節了噴嘴角度，保證了噴嘴的使用壽命。

7。 The high-pressure spray cleaning equipment effectively uses the fan-shaped ceramic nozzle, adjusts the nozzle angle, and ensures the service life of the nozzle.
噴淋清洗機

8。入口采用橡膠輥和惰輪。進給速度穩定，速度與輥道同步。滾輪與惰輪之間的距離可根據工件的尺寸進行調整。

8。 The inlet adopts rubber roller and idler. The feed speed is stable, and the speed is synchronized with the roller table. The distance between the roller and the idler can be adjusted according to the size of the workpiece.

9。高壓噴頭清洗設備頂部裝有吸淋裝置，以保證清潔的工作環境。

9。 The top of the high-pressure nozzle cleaning equipment is equipped with a drenching device to ensure a clean working environment.

噴淋清洗設備的主要工作是將適量的水有效地投入到箱體的前部，在運行過程中通過加熱管加熱水，原料將通過箱體，當操作時，它將直接完成軋制狀態。氣泡機和水，并用網帶推進。在水面，高端配備噴頭和高壓沖洗。您有需求就來我們網站http://xsjtl.com進行咨詢吧！

The main work of the spray cleaning equipment is to effectively put an appropriate amount of water into the front of the box. During the operation, the water is heated through the heating pipe, and the raw material will pass through the box. During the operation, it will directly complete the rolling state. Bubble machine and water are pushed by mesh belt. On the water surface, the high end is equipped with sprinkler and high pressure flushing. Come to our website if you need http://xsjtl.com Consult!

上一篇：超聲波清洗機指示燈亮但沒有超聲波輸出的原因
下一篇：如何操作低溫廢水回收設備？